Dual Motion Mixers
Offset Mount
JVNW's Offset Mount Mixer is used in applications where more than one mixing action is required, and for processors who require the flexibility to address a wider variety of products. The most common configuration is a center mounted scraper with an offset turbine style mixer less the steady bearing. Other configurations include a center sweep style mixer and substituting a high shear style mixer for the offset turbine.
This style of mixer is constructed where one mixer is concentrically mounted and one is off-set, allowing for an optional third mixer. A sanitary steady bearing is used to support the center shaft, eliminating the bending moment caused by offset mounting. A rigid cross arm stiffens the scraper frame to handle the most severe service. The most common configuration is a scraper/turbine combination. For additional product movement in high viscosity applications, multiple flow impellers are combined to ensure complete product movement with no dead zones.
Double Duty:
- Fluid mixing up 75,000cps (consult factory for higher viscosities)
- Use for two component mixing of highly viscous liquids
- Gentle blending / folding action to maintain particulate integrity
- High viscosity blending with near complete blade coverage
- Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
- Able to add a third top mixer or hanging baffle
Typical Products:
- Cosmetics
- Juice Concentrates
- Soups
Dished
Super Duty:
- Fluid mixing up 150,000cps (consult factory for higher viscosities)
- Gentle blending / folding action to maintain particulate integrity
- High viscosity blending with near complete blade coverage
- Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
- Able to add a third top mixer or hanging baffle
Typical Products:
- Cosmetics
- Tomato Paste
- Mayonnaise
Concentric Mount
JVNW's Concentric Mount Mixer is used in applications where more than one mixing action is required, and for processors who require the flexibility to address a wider variety of products. The most common configuration is a scraper/turbine combination. Other configurations include a center sweep style mixer and substituting a high shear style mixer for the turbine.
This style of mixer is constructed where both mixers are concentrically mounted and rotate in opposite directions. Two sanitary steady bearings are used to support each shaft eliminating the bending moment caused by concentric mounting. A rigid cross arm stiffens the scraper frame to handle the most severe service. The most common configuration is a scraper/turbine combination. For additional product movement in high viscosity applications, multiple flow impellers are combined to ensure complete product movement with no dead zones.
Double Duty:
- Fluid mixing up 100,000cps (consult factory for higher viscosities)
- Use for two component mixing of highly viscous liquids
- Gentle blending / folding action to maintain particulate integrity
- High viscosity blending with near complete blade coverage
- Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
Typical Products:
- Cosmetics
- Heavy Concentrates
- Purees
Hinged
Dished
Super Duty:
- Fluid mixing up 500,000cps (consult factory for higher viscosities)
- Gentle blending / folding action to maintain particulate integrity
- High viscosity blending with near complete blade coverage
- Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
- Able to add a third top mixer or hanging baffle
Typical Products:
- Cosmetics
- Peanut Butter
- Fats
Triple Motion Mixers
Offset Mount
JVNW's Triple Duty Mixer is used in applications where high shear mixing is required in addition to dual motion. These mixers are the most versatile available and provides a universal mix tank that can handle nearly any product.
Used in applications where high shear mixing is required in addition to dual motion. These mixers are the most versatile available and provides a universal mix tank that can handle nearly any product. The most common configuration is a center mounted scraper with an offset turbine style mixer and an offset top entry high shear mixer.
Triple Duty:
- Fluid mixing up 150,000cps (consult factory for higher viscosities)
- High shear mixer for adding difficult to incorporate ingredients
- High viscosity blending with near complete blade coverage and high shear capability
- Typical operating speed: Scraper: 12-30 RPM; Turbine: 50-90 RPM; High shear: 1750 RPM
Typical Products:
- Shortening
- Cosmetics
- Pastes
Hinged
Dished
Concentric Mount
JVNW's Triple Duty Mixers provide high speed, high shear vigorous mixing action for dissolving difficult to wet powders and gums that require a shearing action to break up clumps. Available in both top entry and bottom entry configurations. Housed in a stainless steel mount with oversized bearings for long life. Bottom entry style mixers feature a double mechanical seal for long life and are available in a belt drive configuration to eliminate the possibility of water entry into the motor.
These mixers are designed to solve the most challenging of mixing problems. Used in applications where high shear mixing is required in addition to dual motion. These mixers are the most versatile available and provides a universal mix tank that can handle nearly any product. The most common configuration is a center mounted scraper with an offset turbine style mixer and an offset top entry high shear mixer.
Triple Duty:
- Fluid mixing up 250,000cps (consult factory for higher viscosities)
- Blending of difficult to wet powders and liquids
- Break up clumping powders
- Typical operating speed: 1750, 3545 RPM
Typical Products:
- Smoothies
- Dispersions
- Purees
Dished
